These inline valves allow free flow in only one direction, prevent backflow,
and meet the industry's need for higher operating pressures. They also are used for relief and by-pass functions; however, they should not be used as safety relief valves. Kepner's Flexible
Seal Seat™ combines metal-to-metal contact with a resilient seal
seat ensuring bubble-tight shutoff of liquid or gas. This is an ideal choice
for applications that require positive leak-tight sealing and long service
life at pressures to 6000 PSI. Standard and specialty valves handle a
wide variety of applications.
- Flexible
Seal Seat™ for zero leak (bubble-tight) sealing to
6000 PSI
- O-Ring seal positively secured
- Non-pressurized threads
- Poppet stop inside valve body prevents spring from bottoming out
- Generous flow passages allow full flow with minimal pressure drop
- See Applications for selection/ limitation notes about O-Ring and Valve materials
- End Connections: Pipe or Tube (NPT, JIC; 12 combinations)
- Port Sizes: 1/8 inch to 1 inch (3.2 mm to 25 mm)
- Body Materials: Steel, 303 Stainless Steel
- O-Ring Seals: Teflon®, other materials available
- Temperature: -300°F to 450°F (-184°C to 232°C), O-Ring
dependent
- Relief/Check Valve Crack Pressures: 5 PSI (.35 bar)10 PSI (0.7 bar), 25 PSI (1.7
bar), 50 PSI (3.5 bar) and 65 PSI (4.5 bar),
others available
- Operating Pressure: to 6000 PSI (414 bar)
- Flow: to 25 GPM (95 LPM)
Consult Factory or Distributor for more help. Customer/user is solely
responsible to select products suitable for their specific application requirements
and to ensure proper installation, operation and maintenance of these products.
Improper selection or use of products can cause personal injury or property
damage. All sales are subject to Kepner Products Company Standard Terms and Conditions of Sale. |