The cartridge lock valves combine a Kepsel® Cartridge Insert
Check with a rugged pilot operator, and function the same as the counterpart
Kep-O-Lok® inline lock valve. They free flow from valve port to cylinder port
(or portion of circuit) and “lock” reverse flow until pilot pressure
is applied to unlock the internal check valve and allow reverse flow. Kepner's Flexible
Seal Seat™ provides positive bubble-tight locking to prevent load
drift or circuit creep, and answers the need where internal leakage could adversely
affect performance such as with clamping cylinders or outrigger stabilizer
jacks. Standard and specialty valve designs handle a wide variety of
block and load hold applications, and are ideal for use in manifolds, subplates,
or cylinder heads.
- Flexible
Seal Seat™ for zero leak (bubble-tight) seal
locking
- No threaded connections (avoid potential leakage)
- Basic pilot ratio 3:1
- Surge flow protected with calibrated pilot orifice
- Compact, easy installation – Accessory Kepner Holding Device Kits
available
- Sizes: 1/16 inch to 3/4 inch Nominal sizes (1.6 mm to 19 mm)
- Body: Steel; Pilot Piston: Stainless; Poppet, Retainer, Rod: Steel
- O-Ring Seals: Teflon® (internal check valve), Buna -N (external body chamfer)
- Temperature: -40°F to 300°F (-40°C to 149°C), O-Ring
dependent
- Operating Pressure: to 3000 PSI (207 bar)
- Flow: to 40 GPM (151 LPM)
Consult Factory or Distributor for more help. Customer/user is solely
responsible to select products suitable for their specific application requirements
and to ensure proper installation, operation and maintenance of these products.
Improper selection or use of products can cause personal injury or property
damage. All sales are subject to Kepner Products Company Standard Terms and Conditions of Sale. |